Ванная комната 10-дюймовая вентиляционная вантузия спальни.

---

Description

 

**************************************************************************************************************************************************************************************************************************************************************************************************************

**************************************************************************************************************************************************************************************************************************************************************************************************************

Product installation instructions

1, wall installation

1.1 in the appropriate location on the wall, open a fan outlet than the diameter of 5mm ventilation holes connected with the outdoor.

1.2 Remove the panel from the side of the product.

1.3 Connect the ventilation fan cable to the room electrical wiring.

1.4 Secure the ventilator to the wall with self-tapping screws.

1.5 connected to the ventilation fan power supply, check the ventilation fan operation is the following abnormal phenomenon:

     1, whether the normal operation of the fan.

     2, whether there is abnormal vibration or sound occurred.

1.6 If there is no abnormality, disconnect the power and install the terminal box.

2, glass installation

2.1 in the appropriate location on the wall, open a fan outlet than the diameter of 5mm ventilation holes connected with the outdoor.

2.2 Remove the panel from the side of the product.

2.3 Connect the ventilation fan cable to the room electrical circuit.

2.4 Apply the glass glue to the mounting press and the bracket, insert the product holder into the glass hole, install the panel, and then screw the mounting ring onto the bracket.

2.5 connected to the ventilation fan power supply, check the ventilation fan operation is the following abnormal phenomenon:

     1, whether the normal operation of the fan.

     2, whether there is abnormal vibration or sound occurred.

2.6 If there is no abnormality, disconnect the power and install the terminal box.

Product Precautions

Window or wall-type ventilation fan installation, should comply with the following requirements:

1, ventilation fans and ceiling distance of 5cm or more.

2, ventilation fan installation height of the ground at least 2.3 meters above.

3, should not be installed in the water leakage leaks, do not install in high temperature, ventilation pipe to avoid the gas into the flue.

4, when the power supply using the socket, the ventilation fan power cord should be connected with the safety standard plug, when the ventilation fan power cord directly connected with the power supply line, the power supply on the contact from at least 2mm full power switch.

5, usually use the switch to control the fan, to minimize the frequency of the switch action, long-term need not to disconnect the bipolar switch.

6, the ceiling should be set to a check hole, the room should be set up a suction hole to ensure that fresh air into.

7, must pay attention to avoid the gas from the open airway or other open flame equipment into the room.

8, if the power cord is damaged, you must use a dedicated cord or from other manufacturers or maintenance department to buy the special components to replace, to avoid danger, must be by the manufacturer or maintenance department or professional staff to replace the professional staff.

 

---

---

---