85~250V 110V 220V 230V Top Quality 30A 1CH RF Wireless Lighting control Switch Remote Controllers 10 Receiver and Transmitter |

Specification:Working Voltage: AC85~250VWorking Frequency: 315MHz/433MHzMax Current: 30AOperating Temperature: -40\'C~+80\'COutput State: Momentary/Toggle adjusted freely by the Jumper on the receiver.Receiver Size: 70*50*20mm (with cover)Receiver Sensitivity: -105dBmCode: Fixed code, SolderingTransmitting distance: 20-500M(open place)(Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference. )Power supply of transmitter: 1X12V-23A battery ( NOT include) Working ways:Toggle/Self-Lock: Press->On; Press again->OffPress one button for one time is working/ON, press the same button again is stop/OFF. 1 channel switch(receiver) need 1 button remote control (transmitter). Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON, loosen your finger is stop/OFF. 1 channel switch(receiver) need 1 button remote control (transmitter).Latched/Inter-Lock: Press->On; Press other button->OffPress one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).Learn code and Remove Code1. Learn: Power on state, press the learning button on the receiver for one time, the indicator light turns on to off, press any button of the remote control, the indicator flashes 2 times and off. It means you learn it successfully.2. Remove: Power on state, press the learning button on the receiver for about 8 seconds, the indicator light turns on to off, it means the code has been removed successfully. Package:1 x Transmitter (Battery included)10 x Reciever