AC220v 2200w hot air welder gun plastic welding high power seam | Инструменты

​ Package include all the parts in the first picture shows   Operating instructions and precautions 1, the supply voltage must be within the range of 220V ± 10% supplied with the machine type.   2, the operation, the first heater power transferred to the lowest gear, after power according to welding needs, and then gradually increase to achieve the ideal temperature for welding.   3, before stopping, should first turn the knob in turn anti-clockwise, blowing a few minutes, until the gun tube cooling before shut down, so as not to damage the mechanical parts.   4, the operation does not touch the front of the barrel, so as not to burn. With the complete light to play, so as not to damage the gun parts, affecting the service life.   5, the back cover with dust net, every day run out of the torch, be sure to use a brush to clean the dust and dust on the Internet and other dirt, so that the gun ventilation is smooth, otherwise the welding gun due to poor ventilation so that the ceramic core temperature is too high Burn the ceramic core, damage the motor.   6, pay attention to regular cleaning and shaping of the tip, to prevent the nozzle outlet blockage or flattened deformation and burned ceramic core.   Technical Parameters   Model: DSH-D20   Voltage: 220V   Frequency: 50HZ   Power: 2000W   Wind pressure: 3000Pa   Total weight: 0.9 kg ​   Package include all the parts in the first picture shows   Usage:   Welding waterproofing membrane, geomembrane, Pengbu, advertising cloth, welding water tank, PP / PVC sheet, electroplating tank, chemical pool, etc.