Remote control controller UK socket outlet plug 433mhz rf 16A Wirelss power Compatble Rm pro for indoor home automation | Электроника

Remote control controller UK socket outlet plug 433mhz rf 16A Wirelss power socket Compatble Rm pro for indoor home automation

• Working voltage: 175-230V 50Hz/60Hz
• Max. Current: 10A
• Max. Load Power: 2300W
• Remote Frequency: 433.MHz
• Remote Range: 30 Meters/100ft (No Battery)
• Plug Type: UK Plug
• Socket Type: UK Socket
• Remote control power: 12V/23A battery (not included)

Tips: This remote control must use together with our socket. If remote or socket not from our store, we can not 100% ensure this item can work with your socket. Please pay attention to that. 

Most of all, you can let Broadlink Rm-pro to learn the signal of remote, then you can control these socket in your smartphone.

Link: https:/store/product/Broadlink-RM2-RM-Pro-Smart-home-Automation-Remote-wireless-EU-US-UK-Standard-TC2-Broadlink-TC2/1907735_32617113884.html?spm=2114.12010612.0.0.q90vTb

• Remotely control hard-to-reach appliances and devices without built-in power ON/OFF switches at the push of a button
• Socket can be manually operated or via the handy Remote Control.
• Individual ON & OFF function for the remote control
• Strong RF signal works through doors and walls without interfering with other electronics
• Save you the trouble of having to plug in and unplug your electric appliances,  a great assistant to the mobility impaired
• Eliminate wasteful standby power and conserve energy consumption
• Easy to use and operate. Use one transmitter to match 3 socket receivers or program more than one transmitter to each socket. Any one transmitter and socket receiver can match use after finish programming operation.

Note: The battery is not be included in this order for avoiding shipping troubles.

All remote controlled socket units have been pre-programmed and can be used immediately.  To re-program the remote control transmitter and socket receiver, please follow instructions below：

1. Plug the remote controlled socket to a power point and turn the power on.
2. Press the learning button on the right and side of the socket receiver for about 5 seconds till the LED indicator flashes.
3. Release the learning button and press the preferred “ on” or “off” number button of the transmitter.
4. Programming successful when the LED indicator stops flashing.
5. The remote controlled socket is now ready to use.
6. Remote set up only requires one-time programming. ​