AC 1200 Мбит/с 3g 4g маршрутизатор брандмауэр безопасности беспроводной wifi роутеры

---

 

Warm Reminder

The neutral product is Gigabit dual band openwrt wireless router. If you need 3g or 4g or want to use SIM card to dial out Internet, here also need 3g or 4g module. If you purchase the neutral product, it just comes with four antennas. Other bundles will come with 6 antennas.     

As for 3g/4g, 3G can support 3g/2g, 4G can support 4g/3g/2g.

 

Bundle Situation (Important!!!) 

Neutral(no 3G 4G): Gigabit+dual band openwrt wireless router.

3G Version:  3G 300mbps openwrt wireless router.

                          HSPA+/UMTS dual-band 900/2100 MHz

                          GSM/GPRS quad-band 850/900/1800/1900 MHz 

 

 

4G Asia version: 4G 300Mbps openwrt wireless router.

 

                                  FDD LTE: B1/B3/B8                                     TDD LTE: B38/B39/B40/B41                                     TDSCDMA: B34/B39                                      WCDMA: B1/B8                                      CDMA 1x/EVDO: BC0                                      GSM: 900/1800   4G AU  version: 4G 300Mbps openwrt wireless router.                                  FDD LTE: B1/B3/B4/B5/B7/B8/B28                                  TDD LTE: B40                                  WCDMA: B1/B2/B5/B8                                  GSM: B2/B3/B5/B8     4G USA  version 1: 4G 300Mbps openwrt wireless router.                                     FDD LTE: B2/B4/B12                                     WCDMA: B2/B4/B5  

4G USA version 2:  4G 300Mbps openwrt wireless router.

 

                                     FDD_LTE: Band2(1900MHz)                                                        Band 4(1700/2100 MHz)                                                        Band 5 (850 MHz)                                                        Band 13 (700 MHz)                                                        Band 17 (700 MHz)                                                        Band 25 (1900 MHz)                                          UMTS (WCDMA)/HSDPA/HSUPA/HSPA+/DC-HSPA+: Band 1 (2100 MHz)                                                                                                        Band 2 (1900 MHz)                                                                                                        Band 4 (1700/2100MHz)                                                                                                        Band 5(850 MHz)                                                                                                        Band 8 (900 MHz)                                              EVDO/CDMA:( 800 MHz)                                     BC1 (PCS 1900 MHz)                                     BC10 (800 MHz)                                                GSM/GPRS/EDGE    GNSS:                                                              GPS: 1575.42 MHz

                                    GLONASS: 1602 MHz

4G EU version: 4G 300Mbps openwrt wireless router.

                              FDD LTE: B1/B3/B5/B7/B8/B20

                              TDD LTE: B38/B40/B41

                              WCDMA: B1/B5/B8

                              GSM: B3/B8

 

 

Note:   

If you don't know which version that you need to choose, here are some countries' version for your reference.

If your country is not mentioned and you don't know which version need to choose, please ask me and i will help you.

 

Or you can check from these two links:   4G:    https://en.wikipedia.org/wiki/List_of_LTE_networks 3G:    https://en.wikipedia.org/wiki/List_of_UMTS_networks

 

 

ZBT-WG3526 uses the latest MTK wireless solution ,the MT7621 , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1 ×USB 3.0 port, 1×SIM card slot, 1×PCI-E ,1×Micro SD card and so on. Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be 1200Mbps, 4×5Dbi high gain antennas, perform better and cover larger. 

 

3G 4G Module Setting Guide

1. Connect to all the antennas correctly.

2. The sim card must insert firstly, and the chip of the sim card should be upward, then connect to the power. If you need to remove the sim card, in order to avoid damaging the SIM card, please remember to cut off the power before you remove sim card. 

 

 

Upgrade the firmware

If you can access into the recovery mode, that means the router hardware is ok. You can flash the firmware I sent you.

But if you can not access into the recovery mode, sorry, you have damaged the router hardware.

 

Please note: If you purchase the neutral product, the below picture is the shipping list (only four antennas) for your reference. If you purchase other bundles, here will be 6 antennas.

Shipping List

1*openwrt router (ZBT-WG3526)

1*12V/2.5A power adapter

4 or 6*5dbi external antennas

 

Product Specification

Main Chipset	MT7621A/Dual Core /880Mhz
RAM	DDR3 RAM  512MB
FLASH	SPI FLASH  16MB （MAX32MB） Higher Flash, need to redraw the PCBA
Protocol Standard	IEEE 802.11ac、IEEE 802.11a IEEE 802.11n、IEEE 802.11g、IEEE 802.11b； IEEE 802.3、IEEE 802.3u；
Wireless Rate	5G  : 900Mbps 2.4G: 300Mbps
Work Frequency	2.4GHz/5G
Antenna	4 * 5dBi high gain antenna
Interface	1*10/100M/1000M WAN Port， Auto MDI/MDIX 4*10/100M/1000M LAN Port,  Auto MDI/MDIX 1*USB 3.0 port 1*PCI-E Slot 1*SIM card slot 1* Micro SD card slot
LED	PWR.SYS.USB.2G.5G.WAN.3.2.1.0
Button	1*RESET
Power consumption	< 12W
Adapter	DC 12V2.5A
Management	IP:192.168.1.1 USER/root admin/admin
OS	OpenWRT (14.07)
WAN Type	PPPoE、DynamicIP、Static IP
Work Mode	AP; Router;
DHCP	Server, Client, DHCP Client List, Address Reservation
Port Forwarding	Virtual Server, Port Triggering, UPnP, DMZ
Firewall Security	Dos, SPI Firewall IP Address Filter/MAC Address Filter/ Domain Filter IP and MAC Address Binding
DDNS	Support
VPN Pass-Through	PPTP, L2TP, IPSec (ESP Head)
Static Router	Support
System Log	Support
Other Function	Mac clone NTP Synchronize Web firmware upgrade

 

 

 

 

 

 

---

---