Compatible Dreger Ventlator heated Respiratory Humidifier | Accessories

Brand NameNoneMaterialOtherMeasurement unitpiece/piecesSold insell_by_pieceEach pack1Package weight5Package size - length (cm)30Package size - width (cm)20Package size - height (cm)2073 920,00 ₽73 920,00 ₽Add to CartBuy now73 920,00 ₽loader

Description

【Specification】
1. The temperature can reach the saturated temperature of body temperature.
2. The temperature at both ends of the humidifying vessel and the airway can be displayed at the same time, easy to distinguish.
3. The bright window with the pattern label is easy to read.
4. The airway end and vessel end temperature can be set separately.
5. Repeat or one-time breathing tube can be used at the same time.
6. The design of Heater wire adaptor does not need to be purchased for different piping specifications, which is in line with the economy.
【Product usage】
The product provides gaseous humidification for breathing gases.After passing the air flow of the respirator through the humidifier, it is transmitted through the respiratory pipe to the intubation or mask type or the oxygen treatment patient.
【Product standard】
1. Function mode: standby mode/automatic control mode/non-automatic control mode
2. Airflow range: 2-60LPM
3. Amount of moisture: > = 33 mg/L (in the temperature setting of 35 ° C to 40 ° C)
4. Temperature control range
Automatic control mode: 31 to 40 ° C, the accuracy is less than + / - 2 ° C
The automatic control mode: chassis temperature 45 ° C to 75 ° C (1-9 section selection)
Accuracy: + / - 3 ° C
5. The corresponding values of segment number and temperature are as follows
6. Heating dish power: 150W at 220V/ 150W at 110V
7. Heating pipe power: 120Wmax
8. Time required for temperature to reach the set value
9, overheating protection: when the temperature of the heated chassis is more than 110 ° C interrupt heated and report to the police
10. Size: 145mm (H) *160mm (D) *135mm (W) weight: 1.4kg
11. Voltage: 200-240vac or 100-120vac frequency: 50/60 Hz