LBSC Bluetooth Transmitter Connected to 3.5mm Audio Devices USB Powered Stream Music from an Older Non-Bluetooth Device . | Электроника

Bluetooth Audio Transmitter Connections Steps

1. Connect Audio Cable: Connect the Bluetooth Transmitter to the Projector / TV / PC Audio Ouput Port with 3.5mm / RCA audio cable.
2. Turn ON Bluetooth Transmitter: Plug this Bluetooth Transmitter into USB charger for power supply.(usb charger not included ).
3. Turn ON your bluetooth headset or bluetooth speakers to make sure it's in pairing mode.Note: (you may need to turn off your phone's Bluetooth feature).
4. Press the pairing key for about three seconds, the light flashes fast, and the equipment will realize automatic pairing.
Wait until the Bluetooth transmitter and the Bluetooth headset or Bluetooth speaker pair automatically.
It Can Be Paired Only With One Bluetooth Device at a Time.
5. Pairing Successful. Sound will be transmitted to your Bluetooth headset or speakers
Note:
If the pairing is unsuccessful,you can turn off the power. then restart the Bluetooth transmitter and Bluetooth headset / Bluetooth speakers,
Repeat the above steps,Try it several times.
Important:
Different TV models, When In the case of connecting the Cable TV Boxor or TV box;
Please connect the Bluetooth transmitter to the audio Output port of the Cable TV Boxor or TV box

Bluetooth transmitter troubleshooting instructions
Q: Can not pair Bluetooth headset?
A: Please check if the transmitter is on normal power supply,
check if any phone within 33feet around has Bluetooth function turned on,
if there is, please turn off the phone's Bluetooth function, then power off and
restart the transmitter and Bluetooth headset then press the pairing key for about three seconds, the light flashes fast, let the two devices automatically pair.

Q: You can pair Bluetooth headset, but no sound?
A: Please check whether the audio cable is properly connected
to the audio output port of the TV.
If the TV is connected to the cable TV box,
connect the transmitter to the audio output port of the cable TV box.

Q: Paired to another Bluetooth headset, how to connect to the correct device?
A: Turn off the power and then restart the transmitter
and the headset you want to pair, then press the pairing key for about three seconds, the light flashes fast, let the two devices automatically pair.

Q: When connected to the TV's USB port, the transmitter
does not work properly after a while, but it works when connected to a USB charger
A: Due to the low current of the USB power port of some TVs,
the transmitters will not work properly due to insufficient power supply.
Please give priority to USB charger power supply.

Q. Always searching but unable to pair with headphones
A: Please turn off the transmitter and the headset, then turn on again,
Press the pairing key for about three seconds, the light flashes fast, let the two devices automatically pair.