---

 

Satlon D-3 Glue & 606 Catalyst Temperature Glue 1. Introduction: Wensheng glue is also called thermoelectric silicone. It is composed of Satlon D-3 glue and 606 catalyst. It has the characteristics of fast follow-up, room temperature hardening, high temperature resistance and no volatility. It is generally used for safety testing and various kinds. In high temperature environments. 2, composition: Satlon D-3 glue and satlon 606 catalyst Main ingredients: (α-Cyanoacrylate Monomer 90.7%, Polyethyl Ethylacrylate 6.0%, Dimethyl Sebacate 3.3%)   3, Features: All kinds of planes that can be tightly combined can be joined, no need to pre-mix, heat tight, no solvent, slight taste, non-flammable, non-toxic. With the special catalyst Satlon 606, it can be accelerated instantly and is easy to use.   4, use: in high-humidity environment, such as: drilling motors, horns, electric stoves, ovens, etc. in general industry; automobile hood, waterproof strips, filters, etc. and electronics in the automotive industry Disk drives, high-speed precision motors, circuit boards, etc. in the industry.   5, parameters:   SatlonD-3 glue The high temperature resistance coefficient of SatlonD-3 is about: 120 °C

1. Firm in a few seconds.
2. No volatile, no solvent, no toxicity.
3. Easy to operate, single-liquid type, then hardened at room temperature.
4. Then strength, excellent strength, high temperature resistance.
5. Transparent and colorless, low white fog.

Use parameters:

1. Then speed: 30-40 sec (ABS / ABS)
2. Preservability: 6 month / 25°C
3. Viscosity: 800-1000cps /25°C
4. Main ingredients: α–Cyanoacrylate Monomer 90.7%, Polyethyl Ethylacrylate 6.0%, Dimethyl Sebacate 3.3%
5. Solubility: ACETONE or MEK can soften and remove
6. Specific gravity: 1.08 - 1.10
7. Appearance: colorless transparent liquid
8. Flash point: 90 ° C
9. Melting point: 175-190 °C
10. Hardness: 78-90
11. Softening point: 130-145 ° C
12. Cold resistance: -40 ° C × 48 hours no change
13. Heat aging: 100 ° C × 75 hours without change
14. Linear expansion coefficient: 0.000126
15. Tensile shear strength: [25 ° C × 48 hours] Steel: 186 / copper: 185 / PVC: 50 * / ABS: 70 * [* mark is broken material

Satlon 606 catalyst

1. Accelerate the curing of SatlonD-3
2. The porous material is then.
3. The temperature rise test line is followed.
4. Fill the coefficient.
5. Prevent whitening.

package

• SatlonD-3 warming gel: 50g / bottle

• Satlon 606 Catalyst: 160g / bottle

 

Dear Customers,

Thanks for your attentions!

Here are some points we need to show you before you make the orders:

1. China Post is cheap, but will take such a long time, even months. Therefore, please try to use DHL or Fedex if you need the part urgent.

2. Since the special products we sell, it is not easy for some people to confirm which part is suitable.

About delivery

1. If you are in Brazil, Argentina, Chile, Turkey, please provide your CNPJ / CPF / VAT number if send via DHL/Fedex/UPS/TNT, or we will change the shipping way to EMS without informing.

2. If you are in Russia, please provide your full name.

3. Via DHL/Fedex/UPS/TNT, there will be extra charge $45 if your address is the remote one, we will chang it to EMS if you do not pay the remote address extra cost.(China Post Air Parcel if there is no EMS to your country)

4. We promiss the items are the same as they described, but we have the right to change the neutral package without logo, which might be different as it appears on the pictures. Or there might be high TAX you need to pay.

5. If the parcel is failed delivered since the wrong or lacking necessary shipping information, or you do not do the customs clearance, we will not bear any responsibility.

 

 

---

---