Двухканальный цифровой термостат STC-3008 KT99 с двумя реле и выходом 12V 24V 220V для регулирования температуры с подключением нагревателя и охладителя.

Model 1 KT99:

• Independent Dual-way temperature controller.

• Heating or cooling control.Red and blue LED display.

• All parameters setting can be saved after short circuit.

• Directly power output.

• Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system.

• Power Supply:12VDC、24VDC、110V-220V AC、230V AC

• Temperature control range:-50~120°C

• Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)

• Measurement accuracy: ±0.1°C

• Control accuracy: 0.1°C

• Refresh rate: 0.5S

• Sensor1 2: NTC10K sensor each

• Output1 2: Max 5A directly output each

• Environmental requirements: -10-60°C , humidity 20%-85%RH

• Size:100mm(L)*55mm(W)*32mm(Depth)

• Cutting size: 75(L)mm*55(W)mm M3 screw hole

• Power consumption: Static current: ≤35MA,attract current: ≤65MA

• To ensure long-term use, please use a resistive load less than 5A and an inductive load less than 1.25A

Operation Instruction :

• You can set different start temperature and stop temperature in controller 1 and controller 2.
• Cooling mode:
• When set start temperature ≥ stop temperature, the
• controller will work in cooling mode.You can use cooler
• as load. For example, set start temperature 35℃，stop
• temperatre 32 ℃ .Cooler work when temperature ≥
• 35℃,Cooler stop when temperature≤32℃
• Heating mode:
• When set start temperature ≤ stop temperature, the
• controller will work in heating mode.You can use heater
• as load. For example, set start temperature 45℃，stop
• temperatre 60 ℃ .Heater stop when temperature ≥
• 60℃,heater work when temperature≤45℃

Wiring Diagram:

You can use controller 1 and 2 to control two independent

Package Content:

• 1 x Dual temperature controller with two sensors( No including retail box )

• 
  

KT99 with 1.5m waterproof sensor

230V ℃ display:

120V ℉ display:

Model 2 STC-3008:

Parameters:

Features:

• There is no any output voltage of the controller , it is like a switch , you need to connect a power supply to the load, then it can work.

• 1 x Dual Digital Thermostat with Dual Sensors