ipx5 Waterproof Upgraded TWS Earphones Wireless Earbuds Bluetooth 5.0 For iPhone Samsung Twins 5D Stereo 5.24 | Электроника

bluetooth 5.0 Headset TWS Wireless Earphones Twins Earbuds 5D Stereo Headphones

Technical Parameters: 
Model: WA-02
Chip: Ruiqi 8763B
Bluetooth version: V5.0+ER/BDR
Talk time: 6-7 hours
Music time: 6-7 hours
Standby time: 110 hours
Charging time: 1 hour
Headphone battery: 55 mA * 2
Charger battery: 800 mAh
Bluetooth distance: more than 10 meters
Charger (full charge) for the number of times the headset is charged: 6 times
Charging station charging time: 1.5 hours
Waterproof rating: IPX5
Support system: Android, IOS, WINDOWS
Working voltage: 3.3V-4.2V
Speaker specifications: ¢ 6mm
MIC type: silicon microphone
MIC sensitivity: 42 ± 3dB
Supporting protocols: HSP1.2, HFP1.7, A2DP1.3, AVRCP1.6
Transmission frequency: class 2
Transmission range: 2.4GHz-2.48GHz
Audio sampling accuracy: 24bits
Audio decoding format: CVSD, SBC, SBC, ACC
Working temperature: -20 degrees - +50 degrees
Working humidity: 10%-85% (non-frozen state)
Headphone accessories: charging box, ear cap, earphone, charging cable, manual
Product color: black, white, 

Packing information:
Single earphone weight: 5.5g
Headphone size: 23.6mm*16.3mm*23.7mm
Charging box size: 44mm*80mm*33mm
Charging box weight: 55g
Product gross weight: 157g
Packing size: 91*141*42mm


Power on/off:
When you remove the headset from the charging box, the headset will automatically turn on;
When you put the headset in and close the charging box, the headset automatically turns off and charges.


Bluetooth pairing:
1. Remove the two headphones from the charging box, the ears are automatically turned on and interconnected, and accompanied by the prompt tone “TWS Connected”, the left earphone actively sends out the “Pairing” tone, accompanied by red and blue lights.
(Note: You have 3 minutes to connect the headset to your device, otherwise the headset will exit the pairing mode and automatically shut down. Return the headset to the charging box and re-enter it to re-enter the pairing mode.)
2. Open the Bluetooth function menu on the device and select: WA02 Pairing Connection.
(Note: Only the left earphone will connect your device, the right earphone will connect the left earphone, and the left and right earphones can be used as a separate mono earphone. If you use a single ear, please put another earphone back into the charging compartment, only one pair Headphones are available.)


Play music:
Play music with your music player and use any of the headphones to control it.
1. Press once to pause the music, and press again to resume playback;
2. Press the left earphone twice, the volume is reduced, and the right earphone is pressed twice, the volume is increased;
3. Press the left earphone three times to play the next song. Press the right earphone three times to play the previous song.

When talking:
When making and receiving calls (both left and right ears are available):
1. Press to answer the call once, or press 2 seconds to reject the call;
2. Press once to end the call;
3. When a new call comes in when you make a current call:
A. Press once to end the current call and answer the new call;
B. Press and hold for 2 seconds to keep the current call and answer the new call. When you hold the current call and answer the new call, press and hold for 2 seconds to switch between the two calls.

When charging the headset:
Put the headset into the charging case and fully close the charging case. When charging, the headset model WA will be red, the headset will start charging, the WA will turn blue after the headset is full, and the light will be turned off after 30 seconds.


Charge the charging box:
Plug the charging cable into the charger connector to charge the charging box and the headset. When charging, the charging box indicator will light up, and the battery indicator will flash when the battery is charging.



Headphone status indicator light (WA aperture):
Charging: WA icon turns red
Finish charging: no see
Pairing: WA aperture with red and blue discoloration


Charging box status indicator light:
When you use the power to charge the charging box, you can see that the charging indicator lights up.
Charging: The amount of power being charged shows that the blue light is flashing, and the charging is completed;
Finish charging: Four blue lights are on.
Note: If there is only one side of the left and right ears, put the headphones on both sides back to the charging box and take them out again. If you can't solve them repeatedly, you need to re-pair the left and right ears.

Contain:
2 x headphones
1 x charging bin
1 x data line
1 x ear cap
1 x manual