Epoxy Resin & Curing Agent Kit Fiber Reinforced Polymer Composite Material | Обустройство дома

Performance characteristics:
This product is room temperature curing fully transparent epoxy resin and fully transparent epoxy curing agent, with low viscosity, good fluidity, high strength, not brittle, transparent curing, oil resistance, water resistance, aging resistance, environmental protection, safety, easy to use and so on. Scope of application: Applicable to mold production, glass just made, paper film Hardening, Chemical anticorrosion, civil construction material repair, electronic components and parts of the sealing and packaging.

Precautions (please read carefully before use):
1: Resin glue curing speed is related to volume size and temperature, the thicker the adhesive layer, the faster the curing, the higher the temperature, the faster the curing.Therefore, the more mixing, the shorter the operating time, the larger the size of the seal will be, the slower the reverse.
2: Resin and curing agent reaction will be hot, the thicker the glue layer will produce more heat, heat assembly has bubbles produced, so the matching glue to be used quickly, brush thin will solidify slowly.
3: A, b two groups should be strictly proportional weighing, b components too much or too little will affect the performance of the curing; A, b two components mixed, must stir evenly, stirring uneven will cause part of the curing, part of the non-curing condition.
4: Glue in the curing process, curing agent will suck tide, when the air humidity is large, after curing the surface will have a layer of oily feeling, so the curing process to keep dry, do not solidify in the humidity of the environment, when the oil is produced, you can dry the surface, and then sandpaper grinding.
5: When the temperature is low, the a part will have crystallization phenomenon, such as the production of granular rubber slag or completely frozen, when the use of a glue can be heated, the temperature will be open, after the opening can be used normally, does not affect the performance;
6: Use is careful not to touch the skin, contact with the skin sometimes there will be allergic phenomenon produced!Don't entrance and eye!
7: Before using this product in large quantities, please try it in advance to avoid errors! If you have any questions, please contact the customer.

Specification:
Epoxy Resin capacity: 350g
Curing Agent capacity: 100g
Ratio: Resin: curing agent =3:1 [volumetric ratio]
Epoxy Resin size: 6x13cm/2.36x5.12inch
Curing Agent size: 4.5x10.7cm/1.77x4.21inch
Color: Transparent
Quantity: 2 Pcs

Note:
1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Epoxy Resin
1 x Curing Agent