Brand NamepuhuiModel NumberT862Dimensions-Output Power800WInput Voltagle110V/220VOutput Temperature100-350 degreeTemperature StabilityOKMeasurement unitpiece/piecesEach pack1Output power800WWorking voltageAC220/110v 50/60HzTemperature100-350 degree

Unavailable in Russian Federation

Description

Infrared IR Reflow Oven IC Heater BGA Rework Station PUHUI T862

Working voltage : AC220/110v 50/60Hz

Output power: 800W

Temperature: 100-350 degree

Characters:

Can suitable for all of the component,especially Micro BGA component.

1. Adopt infrared weld technology which independent exploration.

2. Use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.

3. Easily operate.Just need one day training.Can operation this machine.

4. No need weld tools,it can weld all the component of 15x15-35x35mm.

5. This machine has 650W heating system.widely to 120x120mm.

6. Infrared heating no have sirocco flow. Don\'t impact perimeter scomponent. Can suitable for all of the component,especially Micro BGA component.

Operation method

(1). Locate, choose and attach the appropriate lens:

The usable of the lenses diameter are 28mm, 38mm, 48mm.(only 1 lens included)

(2)When the area of the chips is below 15mm*15mm, please choose the IR-lamp temperature about 160-240, and choose the lens which D=28mm to avoid destroying other places, usually it will take you about 20-40seconds.

(3)When the area of the chips is between 15mm*15mm and 30mm*30mm, please choose the IR-lamp temperature about 240-320, and choose the lens which D=38mm to avoid destroying other places, usually it will take you about 30-60seconds.

(4)When the area of the chips is above 30mm*30mm, please choose the IR-lamp temperature 350(Attention: you should turn on the pre-heat dish first, and set-up the temperature about 150-200,wait 3-5minutes to allow the temperature steady on the set-up temperature),and choose the lens which D=48mmto avoid destroying other places, and keep the lamp body direct light. You should control the time carefully to avoid burning the chips.

Payment

1. We accept the payment by on line and .

2. When you payment, please leave your correct address and phone number, we only

ship the product to the address you left.

3. Buyer is liable for impact due to wrong shipping address and phone number.

4. Immediate payment is required.

Customs Tax & Duty

1. As long as item location is China ( Except for the United States ), all the parcels bound

to target countries subject to tax&duty. For specific tariff, please kindly contact local

customs house for details. All tax&duty are at buyer's expense.

2. When parcel arrives at inbound country customs house, buyer is liable to clear cargos

according to customs staff requirement within certain period. The clearance period is

determined by local customs and not included in estimated shipping time.

3. For each parcel, we will take a declaration of 60% the total value of goods. If you have

special requirements for the product value of the declaration, please leave a message!

Thank you!

Feedback

1. Our service may be not best but pledge to become better and better.

2. If you have any displeasure on our product, please no hesitate to tell us. We will help

you to solve it. Your satisfaction is our first priority. We appreciate your positive

feedback.

3. We sincerely ask you not to leave negative feedback before contacting us. No seller 

can ensure no problem but value how to solve problem.